INFLA-PSTOP™ High-Pressure Inflatable Pipe Stopper

High Pressure multi-size, reinforced inflatable stopper for temporary isolation of pressurised oil, gas, petrochemical, water and industrial lines. 9 sizes for pipe bores from 4″ to 72″ (100 – 1,800 mm), working pressure 87 psi (6 bar) and back pressure 43.5 psi (3 bar).

Additional information

Pipe I.D. range

4″ – 72″ (100 – 1,800 mm), multi-size

Working pressure

87 psi (6 bar), all models

Back pressure

43.5 psi (3 bar), all models

Construction

Reinforced elastomer

Part numbers

210020 – 210028

Pipe I.D.4″ – 72″100 – 1,800 mm · multi-size
Working pressure87 psi6 bar · all models
Back pressure43.5 psi3 bar · all models
ConstructionReinforced elastomerhigh-pressure
UseIsolationof pressurised lines

INFLA-PSTOP™ is a multi-size, reinforced high-pressure inflatable stopper. It inflates against the pipe wall and isolates the line while work is carried out, holding a back pressure of 43.5 psi (3 bar) on every model.

Each model covers a range of bores, so a few stoppers handle many pipe sizes on site. It is used for temporary isolation of pressurised oil, gas, petrochemical, water and industrial lines. Always check the rated pressures for your model before you inflate.

Key features

  • Multi-size: each model seals a range of bores
  • Reinforced elastomer body for high pressure
  • Working pressure 87 psi (6 bar) on every model
  • Back pressure up to 43.5 psi (3 bar)
  • Temporary isolation of pressurised lines
  • Oil, gas, petrochemical, water and industrial lines
  • Other sizes on request

How to use

Eight steps, one stopper.

  1. Know the stopperThe reinforced rubber body is inflated through its valve and presses on the pipe wall to block the line.
  2. Choose the sizeMeasure the pipe I.D. and pick the model whose range covers it.
  3. Clean the pipeClean the seal area and remove debris and anything sharp that could cut the rubber.
  4. Insert fullyPush the stopper fully inside the pipe, square to the pipe axis.
  5. Inflate with a gaugeInflate slowly through the valve with a calibrated gauge, up to the working pressure of your model.
  6. Fit the restraintAnchor the stopper with a restraint before the line is put under pressure.
  7. Isolate & monitorKeep the back pressure within the limit and watch the gauge. Never stand in line with the stopper.
  8. Release & removeRelease the line pressure first, deflate the stopper fully, then pull it out and inspect it.

Sizes & part numbers

Find your size.

Enter your pipe inner diameter: every model whose range covers it is highlighted. Other sizes on request.

P/N Nominal size Min. pipe Ø Max. pipe Ø Working pressure Back pressure Product Ø Product length Product weight
210020 4–8″100–200 mm 4″100 mm 8″200 mm 87 psi6.0 bar 43.5 psi3.0 bar 3.3″85 mm 19.7″500 mm 1 kg
210021 6–12″150–300 mm 6″150 mm 12″300 mm 87 psi6.0 bar 43.5 psi3.0 bar 5.3″135 mm 19.7″500 mm 2.2 kg
210022 8–16″200–400 mm 8″200 mm 16″400 mm 87 psi6.0 bar 43.5 psi3.0 bar 7.2″182 mm 23.6″600 mm 3.4 kg
210023 12–24″300–600 mm 12″300 mm 24″600 mm 87 psi6.0 bar 43.5 psi3.0 bar 11″280 mm 31.5″800 mm 8.1 kg
210024 16–32″400–800 mm 16″400 mm 32″800 mm 87 psi6.0 bar 43.5 psi3.0 bar 14″355 mm 39.4″1000 mm 13.7 kg
210025 20–40″500–1000 mm 20″500 mm 40″1000 mm 87 psi6.0 bar 43.5 psi3.0 bar 18.9″480 mm 41.3″1050 mm 24.9 kg
210026 24–48″600–1200 mm 24″600 mm 48″1200 mm 87 psi6.0 bar 43.5 psi3.0 bar 22.8″580 mm 49.2″1250 mm 36.3 kg
210027 32–64″800–1600 mm 32″800 mm 64″1600 mm 87 psi6.0 bar 43.5 psi3.0 bar 30.7″780 mm 47.2″1200 mm 55 kg
210028 48–72″1200–1800 mm 48″1200 mm 72″1800 mm 87 psi6.0 bar 43.5 psi3.0 bar 46.5″1180 mm 63″1600 mm 115 kg

Never exceed the working or back pressure, and never inflate the stopper outside a pipe. Use a calibrated gauge, anchor the stopper before pressurising and never stand in line with it while the line is under pressure. All models: working pressure 87 psi (6 bar), back pressure 43.5 psi (3 bar).

Applications

Where it works.

Oil, gas and petrochemical lines
Water supply networks
Sewer and industrial lines
Isolation during repair and maintenance
Isolation for pressure work

My project 0

Need a different size or pressure rating?

Send us the pipe I.D., material and test pressure. We will confirm the right plug and lead time.

Request a quote →