FAQ

Pipe test plugs and rubber seals: common questions

Short answers to the questions engineers and buyers ask us most. If yours is missing, send it to us.

Answers

Products, sizes and supply

What is a pipe test plug?

A reusable tool that temporarily seals the end of a pipe so the line can be pressure-tested with water or air. It replaces welded end caps that have to be cut off after the test.

How do I choose the right plug size?

Choose by the actual internal diameter of the pipe, not the nominal size. Each plug lists the bore range it fits, for example the 100 mm aluminium plug fits 94 to 110 mm.

What is the highest test pressure your plugs can take?

The IN-MAX™ and OUT-MAX™ plugs are rated to 15,000 psig, or 1,034 bar. Aluminium and steel drain plugs are for low-pressure tests up to about 2 bar.

What is the difference between a test plug and an isolation plug?

A test plug closes a pipe end so the line can be pressurised and checked. An isolation plug keeps water, gas or debris out of a section during maintenance or welding.

Can I test a single weld without filling the whole line?

Yes. The DB-WELD™ tester forms a small test zone between two seals around the weld, up to 255 bar, and the DBG-WELD™ works even with pressure in the line.

What is the largest pipe your inflatable plugs cover?

INFLA-STOP™ models cover bores from 35 mm to 4,200 mm, with working pressure from 1 to 2.5 bar depending on size.

Which sizes of 3S rubber rings do you supply?

Seventeen sizes from 63 to 800 mm for PVC and UPVC pipes, in EPDM or SBR.

Do you make custom rubber parts?

Yes. We design the part, make the tooling and produce to your drawing or sample. We have completed more than 3,000 custom projects for customers in 12 countries.

Where are your factories and branches?

Our head office and factory are in Jeddah, with branches in Riyadh and Dammam, a sales office in Dubai and a manufacturing facility in the UAE since 2017.

Do you deliver outside Saudi Arabia?

Yes. We serve Saudi Arabia, the UAE and the GCC, and have customers in 12 countries.

How do I request a quote?

Send the product type, size, test pressure and quantity through the contact form or on WhatsApp at +966 54 909 9642.

Still have a question?

Our engineers answer in Arabic or English.

Request a quote →