Home / Industries / Petrochemical & refining

Industries · Petrochemical & refining

Turnarounds run on tight clocks.

Weld testers, flange plugs and high-pressure plugs that cut hours from shutdowns, on-site hydrotests, and chemical-resistant seals and bonded parts for pumps, compressors and process lines.

Weld testUp to 2,250 psig155 barg between seals
Flange sizes6″ – 24″ANSI 150 · 300 · 600
CompoundsFKM · NBR · EPDMchosen for the medium

Petrochemical & refining

Every hour of a shutdown costs money.

In a turnaround the critical path is often the test, not the weld. Testing one weld instead of a whole system, and plugs that set in minutes instead of welded caps, gives those hours back. Our seals are chosen for the fluid they meet, not only for the size.

Challenges

What refineries ask of us.

Short shutdown windows

Plugs that install in minutes, with no welding, cutting or re-bevelling.

Many tie-in welds

DB-WELD™ and FLANGE-WELD™ test just the weld zone.

Aggressive media

FKM and other compounds for hydrocarbons, solvents and acids.

Rotating equipment

Bonded mounts and seals for pumps and compressors.

Applications

Where our parts work.

Flange and tie-in welds

Weld-neck flanges tested and isolated in place.

Positive isolation

High-pressure stoppers during maintenance.

Exchanger and line tests

High-pressure plugs for tubes, spools and elbows.

Pumps and compressors

Seals, gaskets and anti-vibration mounts.

Obsolete spares

Rubber parts rebuilt from worn samples.

Test records

Reports and pressure charts for your QA files.

Rubber selection

The right rubber for this work.

General guidance. Our engineers confirm the compound for your medium and temperature.

PU

Scraper and wiper seals, rollers and wear pads in plants with oil and abrasive service.

FKM

Hot hydrocarbons, aromatics and many acids.

NBR

Oils, fuels and lubricants at moderate temperature.

EPDM

Steam, hot water and cooling water, not oil.

Open the rubber guide

Standards

Standards we work with.

ASME B31.3
Process piping design and leak testing.
ASME PCC-2
Repair of pressure equipment and piping.
ANSI / ASME B16.5
Flange classes 150, 300 and 600 covered by FLANGE-WELD™.

Talk to an engineer

Tell us about your project.

Choose a request type and add the details. An engineer replies with the right product, part or test plan.

FAQ

Questions from petrochemical & refining.

How does a weld test plug save time?

It tests only the small zone around the weld, so you fill and pressurise litres instead of a whole system.

Which flange classes does FLANGE-WELD™ cover?

6″ – 24″ in ANSI classes 150, 300 and 600.

Can you match a seal that is no longer available?

Yes. Send a worn sample and we rebuild it in the right compound.

Do you test on site during turnarounds?

Yes, anywhere in Saudi Arabia.

Planning a turnaround?

Send the weld list, sizes, classes and dates. We prepare the plugs and the test team.

Request a quote →