grf ind oilgas

Home / Industries

Industries

One rubber factory.
Many worlds.

We are a rubber factory first, with our own metal shop for the parts that go with the rubber. Every industry we serve has its own conditions, its own products and its own team.

RubberCompounding & moulding
MetalMachining & fabrication
Rubber-to-metalBonded parts

Who we are

Rubber at the core.

Everything starts with rubber: we design the compound, build the mould and make the part. When a part needs metal, we machine it in-house and bond the two together, so one factory delivers the complete part.

What industry asks of us

Built for hard conditions.

Every sector puts a part under a different kind of stress. We start from the condition, then choose the compound, the metal and the design.

01Pressure

Test and isolation plugs rated up to 1,034 bar, for hydrotests and line isolation.

02Oil & chemicals

NBR for oils, fuels and hydrocarbons, or the compound your specification calls for.

03Water & sewage

EPDM joint rings and seals for water, sewage and weather, from 25 to 800 mm.

04Heat & steam

Compounds chosen for heat and steam, with metal parts machined to match.

05Sea water & sun

Marine fenders, hatch seals and bonded parts in compounds made for sea water and sunlight.

06Tight schedules

Stock in our branches and moulds made in-house, to help you meet shutdown and site deadlines.

Three ways we build

01

Rubber

Seals, rings, gaskets and fenders, moulded from compounds we mix for the duty.

02

Metal

Flanges, inserts, plates and plug frames, machined in our own metal shop.

03

Rubber + metal

Bonded mounts, bushings and test plugs: rubber and metal joined into one part.

See our capabilities

Questions

Industry FAQ.

Short answers to what engineers and buyers ask us most.

Which rubber do you use for oil and gas parts?

For oils, fuels and hydrocarbons we usually use NBR. When your specification calls for a different compound, we make the part in that compound.

Can you make parts to our project specification?

Yes. We work from your drawings, datasheets or samples, make the moulds and metal parts in-house, and share material and test information for your approvals.

Do you make both rubber and metal parts?

Yes. GRF is a rubber factory with its own metal shop, so we machine steel, stainless and brass parts and bond them to rubber when the design needs it.

What quantities can you supply?

From a single prototype or replacement part to steady production volumes on repeat orders.

Which countries do you supply?

We supply projects in 12 countries from our factories in Saudi Arabia and the UAE.

Have a part to make?

Send us a drawing, a sample or the problem. Our engineers will reply with a solution and a quote.

Request a quote →