CORA-SEAL™ Sealing Ring for HDPE Corrugated Pipes

Sealing ring for the joints of HDPE corrugated (structured-wall) drainage and sewer pipes. It sits in the first corrugation valley of the pipe end and seals against the smooth socket, keeping the joint watertight through backfill, ground movement and service. EPDM to EN 681-1, sizes 100 – 800 mm (4″ – 32″).

Additional information

Pipe size

100 – 800 mm (4″ – 32″), 9 sizes; other sizes on request

Rubber

EPDM to EN 681-1 (type WC); SBR on request

Hardness

60 ± 5 IRHD

Pipes

HDPE / PP corrugated (structured-wall) to EN 13476, SN4 / SN8

Use

Drainage, sewer and stormwater pipe joints

Part numbers

340003 – 340020

Pipe size100 – 800 mm4″ – 32″ · 9 sizes
RubberEPDMSBR on request
Hardness60 ± 5IRHD
StandardEN 681-1type WC
PipesEN 13476PE / PP · SN4 / SN8

CORA-SEAL™ is GRF’s sealing ring for HDPE corrugated (structured-wall) pipes used for drainage, sewer and stormwater lines. The ring is placed in the first corrugation valley of the pipe end, and when the pipe is pushed into the smooth socket of the next pipe or fitting, its fins press against the socket bore all the way round.

The joint stays watertight during installation, backfilling and long-term service, and holds its seal under earth load, ground movement and thermal expansion. The ring keeps groundwater out of the line and sewage in.

Made in EPDM to EN 681-1 (type WC) as standard, with SBR on request, for PE and PP structured-wall pipes to EN 13476 in stiffness classes SN4 and SN8. Other sizes and profiles on request.

Key features

  • Sits in the first corrugation valley of the pipe end
  • Fins seal against the smooth socket bore
  • Watertight through backfill, ground movement and thermal expansion
  • EPDM to EN 681-1 (type WC); SBR on request
  • Hardness 60 ± 5 IRHD
  • For PE / PP structured-wall pipes to EN 13476, SN4 and SN8
  • Fitted by hand; a pipe puller joins the larger sizes
  • 9 sizes from 100 to 800 mm (4″ – 32″); other sizes on request

How to use

Seven steps, one watertight joint.

  1. Know the ringCORA-SEAL™ sits in the first valley of the corrugated pipe end. When the pipe is pushed into the socket, its fins seal against the smooth socket bore.
  2. Clean & checkHave the ring, a clean cloth and pipe lubricant ready. Clean the pipe end, the socket and the ring, and check the ring for cuts or damage.
  3. Fit the ringStretch the ring by hand over the pipe end and into the first valley between the corrugations, working it round the pipe.
  4. Check the seatingGo round the pipe and check that the ring sits evenly in the valley all the way round, with no twist.
  5. LubricateApply pipe lubricant to the ring and to the inside of the socket.
  6. Push homeLine the pipes up straight and push the pipe end into the socket by hand until it is fully home.
  7. Pull together & checkLarger pipes are pulled together with a pipe puller until fully home. The ring stays in its valley, pressed evenly on the socket.

Sizes & part numbers

Find your size.

Enter your pipe size in mm: the matching ring is highlighted (nominal inch size shown under it). Each size comes in EPDM or SBR, with its own part number. Other sizes on request.

P/N EPDM P/N SBR Pipe size For
340004 340003 100 mm4″ Corrugated PE / PP pipe · SN4 / SN8
340006 340005 150 mm6″ Corrugated PE / PP pipe · SN4 / SN8
340008 340007 200 mm8″ Corrugated PE / PP pipe · SN4 / SN8
340010 340009 250 mm10″ Corrugated PE / PP pipe · SN4 / SN8
340012 340011 300 mm12″ Corrugated PE / PP pipe · SN4 / SN8
340014 340013 400 mm16″ Corrugated PE / PP pipe · SN4 / SN8
340016 340015 500 mm20″ Corrugated PE / PP pipe · SN4 / SN8
340018 340017 600 mm24″ Corrugated PE / PP pipe · SN4 / SN8
340020 340019 800 mm32″ Corrugated PE / PP pipe · SN4 / SN8

Use only pipe lubricant approved for the ring material; never use oil or grease. Keep the pipe end, valley and socket clean, and do not twist the ring. Store rings away from sunlight, ozone and heat, flat and free of tension.

Applications

Where it works.

Sewer and drainage pipelines
Stormwater networks
HDPE corrugated pipe joints
Keeps groundwater out of the line

My project 0

Need a different size or pressure rating?

Send us the pipe I.D., material and test pressure. We will confirm the right plug and lead time.

Request a quote →