Home / Industries / Water & pipelines

Industries · Water & pipelines

Every joint sealed. Every line proven.

Joint rings for water and sewer pipes, mechanical and inflatable plugs to test and isolate networks, and hydrostatic testing to EN 805, from small house drains to 72″ mains.

Plug range1/2″ – 80″12 – 2,000 mm
Joint ringsEPDM · SBREN 681-1 · ASTM F477
Test standardEN 805water supply

Water & pipelines

A leak you cannot see is still a leak.

Water and sewer networks are buried for decades. We seal the joints with rings made for them, and prove the line with plugs and pressure tests before it is backfilled.

Challenges

What networks need.

Watertight joints

Rings for PVC, UPVC and HDPE corrugated pipes.

Leak and pressure tests

Plugs for air, water and back-pressure tests.

Flow stopping

Inflatable stoppers for live sewers and drains.

Long service life

EPDM for water, weather and ozone.

Applications

Where our parts work.

Water mains

Joint rings and pressure testing of new lines.

Sewers and drains

Plugs for testing and flow stopping.

Stormwater

Corrugated pipe rings and inflatable plugs.

Building drainage

Balloon and mechanical plugs for small pipes.

Pump stations

Seals, gaskets and mounts.

Handover

Test reports and pressure charts.

Rubber selection

The right rubber for this work.

General guidance. Our engineers confirm the compound for your medium and temperature.

EPDM

Potable water, sewage, weather and ozone.

SBR

Drainage and sewer rings.

NBR

Lines that may carry oil or fuel traces.

Open the rubber guide

Standards

Standards we work with.

EN 805
Water supply: test pressure is the lower of MDP × 1.5 and MDP + 5 bar.
EN 681-1
Elastomeric seals for water and drainage pipe joints.
ASTM F477
Elastomeric seals for plastic pipe joints.
EN 13476
Structured-wall drainage pipes, for our CORA-SEAL™ rings.

Talk to an engineer

Tell us about your project.

Choose a request type and add the details. An engineer replies with the right product, part or test plan.

FAQ

Questions from water & pipelines.

Which plug do I need for a sewer test?

For small pipes a mechanical CL-PLUG™, for larger pipes or several sizes an INFLA-TEST™ inflatable plug.

Which rubber is used for potable water rings?

Usually EPDM. Tell us any approval your project needs.

Can you stop flow in a live sewer?

Yes, with INFLA-STOP™ inflatable stoppers up to 72″ (1,800 mm).

Do you test new water mains?

Yes, to EN 805 or your specification, with report and pressure chart.

Building a network?

Send the pipe material, sizes and test needs. We supply rings, plugs and the test team.

Request a quote →