Home / Industries / Oil & gas

Industries · Oil & gas

Pressure is our daily work.

High-pressure test plugs, weld testers, inflatable isolation plugs and hydrostatic testing for pipelines and production facilities, plus custom rubber and bonded parts made for oil, gas and heat.

Test pressureUp to 15,000 psi1,034 bar
Pipe sizes3/8″ – 80″10 – 2,000 mm
HydrotestOn site in Saudi Arabiaor at our factory

Oil & gas

Where a slipping plug is not an option.

Oil and gas lines run at pressures that leave no room for guesswork. Our plugs grip and seal steel pipe for tests up to 15,000 psi, our team runs the test, and our rubber is compounded for the oil, gas and heat it will meet.

Challenges

The conditions we design for.

Very high test pressures

Gripping plugs rated by pipe size and schedule, up to 15,000 psi (1,034 bar).

Tie-ins and new welds

Weld testers that test one weld without filling the whole line, even with upstream pressure on.

Oil, fuel and gas

Seals in NBR or FKM that resist swelling in hydrocarbons.

Heat and sun

Compounds and metals chosen for desert heat and outdoor service.

Applications

Where our parts work.

Pipeline construction

End testing of new pipe strings and spools.

Tie-ins and repairs

Weld testing and isolation on new and live lines.

Line isolation

Inflatable stoppers for temporary isolation during work.

Pumps and compressors

Seals, gaskets and bonded mounts to drawing.

Plant maintenance

Replacement rubber parts made from worn samples.

Commissioning

Hydrostatic tests with report and pressure chart.

Rubber selection

The right rubber for this work.

General guidance. Our engineers confirm the compound for your medium and temperature.

PU

Pipeline pigs, scraper discs, wipers and wear parts: top abrasion resistance with good oil resistance.

NBR

Oil, fuel and gas service up to about 100 °C.

FKM

Hot hydrocarbons, fuels and many chemicals.

EPDM

Water injection, fire water and steam, not oil.

Open the rubber guide

Standards

Standards we work with.

ASME B31.3
Process piping: hydrotest at least 1.5 × design pressure.
ASME B31.4
Liquid pipelines: hydrotest at least 1.25 × design pressure.
API 1110
Pressure testing of steel pipelines.
ASME PCC-2
Repair of pressure equipment and piping, referenced by our high-pressure plugs.

Talk to an engineer

Tell us about your project.

Choose a request type and add the details. An engineer replies with the right product, part or test plan.

FAQ

Questions from oil & gas.

What is the highest test pressure your plugs cover?

Up to 15,000 psi (1,034 bar) with IN-MAX™, depending on pipe size and schedule.

Can you test a weld while the line is still under pressure?

Yes. DBG-WELD™ isolates and tests a new weld with upstream pressure up to 1,500 psig (103 barg).

Do you run hydrotests on site?

Yes, anywhere in Saudi Arabia, with test report, pressure chart and calibrated gauges.

Which rubber do you use for oil service?

Usually NBR, or FKM for hotter hydrocarbons and chemicals. Our engineers confirm it for your medium.

Have a line to test or isolate?

Send the pipe size, schedule, pressure and location. We reply with the right plug or a test plan.

Request a quote →