INFLA-TEST™ Inflatable Pipe Test Plug with Bypass

Multi-size inflatable test plug with a bypass for leak testing, flow control and isolation of pipelines. 9 sizes for pipe bores from 4″ to 72″ (100 – 1,800 mm), single or double bypass, working pressure 36 psi (2.5 bar) and back pressure 14.5 psi (1.0 bar).

Additional information

Pipe I.D. range

4″ – 72″ (100 – 1,800 mm), multi-size

Working pressure

36 psi (2.5 bar), all models

Back pressure

14.5 psi (1.0 bar), all models

Bypass

Single or double, M6 to 2 × 2″

Material

NR/SBR + Kevlar (NBR, CR, EPDM optional)

Part numbers

220001 – 220023

Pipe I.D.4″ – 72″100 – 1,800 mm · multi-size
Working pressure36 psi2.5 bar · all models
Back pressure14.5 psi1.0 bar · all models
BypassSingle or doubleM6 to 2 × 2″
MaterialNR/SBR + KevlarNBR, CR, EPDM optional

INFLA-TEST™ is a multi-size inflatable plug with a bypass through its body. It seals the pipe like a stopper, while the bypass lets you fill, vent, drain or pass flow through the plug, or connect test equipment, without taking it out.

Each model inflates over a wide range of bores, so a few plugs cover many pipe sizes. Choose a single or double bypass to suit your test set-up. The reinforced NR/SBR rubber with Kevlar cord works from −40 °F to 158 °F (−40 to 70 °C).

Key features

  • Multi-size: each model seals a wide bore range
  • Bypass through the plug: single or double, from M6 to 2 × 2″
  • Working pressure 36 psi (2.5 bar) and back pressure 14.5 psi (1.0 bar) on every model
  • Reinforced NR/SBR rubber with Kevlar cord; NBR, CR or EPDM on request
  • Quick-coupling or Schrader air connection
  • For leak tests, flow control and isolation in sewer, water and industrial lines
  • Operating temperature −40 °F to 158 °F (−40 to 70 °C)

How to use

Seven steps, one plug.

  1. Know the plugAn inflatable rubber body seals the pipe; the bypass passes through it for filling, venting or flow.
  2. Confirm the fitMeasure the pipe I.D. and pick the model whose range covers it, with the bypass size you need.
  3. Clean the pipeClean the seal area and remove debris and anything sharp that could cut the rubber.
  4. Insert fullyPush the plug fully inside the pipe, square to the pipe axis, with the bypass towards you.
  5. Inflate with a gaugeInflate slowly with a calibrated gauge, up to the working pressure.
  6. Fill & testConnect the test hose to the bypass, fill and vent the line, then run the test within the back-pressure limit.
  7. Release & removeRelease the line pressure first, deflate the plug fully, then pull it out and inspect it.

Sizes & part numbers

Find your size.

Enter your pipe inner diameter: every model whose range covers it is highlighted. Each size comes with a single or double bypass. Other sizes on request.

P/N Nominal size Min. pipe Ø Max. pipe Ø Working pressure Back pressure Product Ø Product length Bypass Ø Product weight
220001 4–8″100–200 mm 4″100 mm 8″200 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 3.3″85 mm 19.7″500 mm 1″ 2.1 kg
220016 4–8″100–200 mm 4″100 mm 8″200 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 3.3″85 mm 19.7″500 mm 2 × 1/2″ 2.3 kg
220002 6–12″150–300 mm 6″150 mm 12″300 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 5.3″135 mm 19.7″500 mm 2″ 7.2 kg
220017 6–12″150–300 mm 6″150 mm 12″300 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 5.3″135 mm 19.7″500 mm 1″ × 1/2″ 7.5 kg
220003 8–16″200–400 mm 8″200 mm 16″400 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 7.2″182 mm 23.6″600 mm 2″ 8.3 kg
220018 8–16″200–400 mm 8″200 mm 16″400 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 7.2″182 mm 23.6″600 mm 2 × 1″ 8.6 kg
220004 12–24″300–600 mm 12″300 mm 24″600 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 11″280 mm 31.5″800 mm 2″ 19 kg
220019 12–24″300–600 mm 12″300 mm 24″600 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 11″280 mm 31.5″800 mm 2 × 2″ 20 kg
220005 16–32″400–800 mm 16″400 mm 32″800 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 14″355 mm 39.4″1000 mm 2″ 32 kg
220020 16–32″400–800 mm 16″400 mm 32″800 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 14″355 mm 39.4″1000 mm 2 × 2″ 35 kg
220006 20–40″500–1000 mm 20″500 mm 40″1000 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 18.9″480 mm 41.3″1050 mm 2″ 38 kg
220021 20–40″500–1000 mm 20″500 mm 40″1000 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 18.9″480 mm 41.3″1050 mm 2 × 2″ 42 kg
220007 24–48″600–1200 mm 24″600 mm 48″1200 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 22.8″580 mm 49.2″1250 mm 2″ 65 kg
220022 24–48″600–1200 mm 24″600 mm 48″1200 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 22.8″580 mm 49.2″1250 mm 2 × 2″ 70 kg
220013 32–64″800–1600 mm 32″800 mm 64″1600 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 30.7″780 mm 78.7″2000 mm 2″ 140 kg
220023 32–64″800–1600 mm 32″800 mm 64″1600 mm 36.3 psi2.5 bar 14.5 psi1.0 bar 30.7″780 mm 78.7″2000 mm 2 × 2″ 150 kg
220014 48–72″1200–1800 mm 48″1200 mm 72″1800 mm 36.3 psi2.5 bar 14.5 psi1.0 bar — — — —

Never exceed the working or back pressure, and never inflate the plug outside a pipe. Use a calibrated gauge, anchor the plug before pressurising and never stand in line with it while the line is under pressure. All models: working pressure 36 psi (2.5 bar), back pressure 14.5 psi (1.0 bar).

Applications

Where it works.

Leak and hydrostatic testing
Sewer and drain testing with flow through the bypass
Industrial pipelines: flow control and isolation
Water supply networks
Construction and repair works

My project 0

Need a different size or pressure rating?

Send us the pipe I.D., material and test pressure. We will confirm the right plug and lead time.

Request a quote →